This is a universal and can be powered on any vehicle as long as your interior trim panels have gaps where the lighting tubing can be inserted. Double checking your interior ahead of time is recommended – common lighting placements include between gaps along the front dash, center console, and door seams.
This kit can be powered on all vehicles; included wire taps will work on your 12V cigarette lighter wiring for a clean hidden install.
Step 1: power your wire harness using any 12v positive and ground connection (we recommend tapping into the cigarette lighter wiring).
Step 2: Install Lights in your desired area by pushing them securely into any gap or split in your interior. You may need a squeegee or credit card to help fit the lights in tight areas. It is important to note that lights only bend one way, so be sure to test and keep this in mind when installing. Run wires as well and as cleanly as possible for the best results. Wires can be tucked into cracks and crevices as needed.
Step 3. Each strip is cuttable as needed for best fitment. It can be cut using common household scissors. The strips can be cut after or before any led. If you cut on a led and experience flickering, cut a little more off, and the lights should function as normal. Do not cut off the wire end. Please cut the end away from the wire.
Step 4: Power each strip directly to the wiring harness using the included extension wire and hide wires as best you can.
Step 5: Make sure Bluetooth is enabled on your phone. Then open the app Magic Car Light to control your lights and enjoy!