Dodge Charger DRL RGB multicolor LED boards 2015-2019 Daytime Running Lights (DRL) RGBW Boards

You do NOT need to open your headlights or take off your bumper! Nor is any coding required, these are plug and play.

Fitment:

• 2015-2019 Dodge Charger

For Yellow DRL: 

• Carefully remove your old DRL (use a flat razor blade or a smakk screwdriver to lift out the old DRL);
• Use the included heat thermal paste to glue the new DRL into position.

Done.

For RGBW DRL:  

• Carefully remove your old DRL (use a flat razor blade or a small screwdriver to lift out the old DRL);
• Use the included heat thermal paste to glue the new DRL into position;
• Connect the red and black wiring to the power and ground on your vehicle’s battery;
• Connect the white wire (with the mini fuse on it) to any switched fuse opening in your fuse box.  Depending on the car, you may need to extend the wire to reach the fuse box.  This will enable your lights to only be powered when the car is turned on (a switched fuse means power to the fuse is on only when the car is running).
• Turn off the factory DRL via your car’s navigation menu.

Done.